Maintenance:
At normal use all mechanical/moving parts only requires a monthly lubrication to be maintained.
The pins must be greased every three months. Important! Use only oil or grease free from acid.
An annual inspection must be performed by a skilled person. Every eventually wearing out or
defective part must be replaced with original spare parts. The owner and- or user must take
precautions that repair is made by a skilled person. Before every use the operator must take
precautions that there are no visible faults such as leaks, damage of the WD and loose or missing
parts. In case the operator suspects that the unit has been overloaded or wrongly loaded it must
before further use be inspected by a skilled person or an authorized.
Oil:
DO NOT use brake fluid, motor oil, etc!
Volume:
0.6 litres.
Type:
Use only hydraulic oil with a gradation (viscosity) of AWS22.
Compac recommends Castrol.
In case the hydraulic unit has a lack of oil or has been taken apart in order to replace the seals then
fill up with the correct oil quantity. Activate the pump handle and add oil slowly through the filling hole
at the plug. The lifting arms must be in minimum position (as close together as possible) when refilling
oil. Warning! Too much oil quantity might cause problems to the hydraulic system.
Decommissioning:
If the unit should ever be scrapped, draw off the oil into an approved container and dispose it at an
approved authority.
10.07.2007 GB/VL
