16
AFTER WORK IS TERMINATED
At the end of the work, before performing any type of maintenance proceed as follows :
1.
Turn pad motor switch (1) off
2.
Actuate switch (2) to lift the base
3.
Park the machine and actuate the parking brake
4.
Turn the key to position "0" to turn the machine off
5.
Detach suction connector (1), pull out suction tube (2), remove suction unit fastening belt
(3) and pull out suction unit (4).
WARNING!
Always wear gloves when doing this to protect yourself from
contact with hazardous solutions.
6.
Loosen the hooks on drum (7).
7.
Remove head (8).
8.
Replace paper filter (9).
9.
Put the head back in and fasten it on the drum with its hooks. Put the suction unit back in
its compartment, insert the flexible tube in the nozzle and then reattach the connector.
10.
Dismantle the brushes and clean them with a jet of air (to dismantle the brushes refer to
the section “DISMANTLING THE BRUSH
3
1
2
4
2
1
3
4
7
8
9
