Comnet NetWave NW7 Скачать руководство пользователя страница 1 | Manualshive

Страница: 1 / 70

background image

INSTALLATION AND OPERATION MANUAL

INDUSTRIAL OUTDOOR HIGH THROUGHPUT

802.11A/N WIRELESS ETHERNET

Thank you for purchasing NetWave® from ComNet. This installation guide applies to
the following models:

NW7: Industrial Multipoint, FCC Version, User Configurable

NW7E: Industrial Multipoint, ETSI Version, User Configurable

NWK7: Industrial Multipoint Kit, FCC Version (Includes NWK7_AP and NWK7_CL)

NWK7E: Industrial Multipoint Kit, ETSI Version (Includes NWK7E_AP and NWK7E_CL)

The NetWave industrially hardened wireless Ethernet transmission link from
ComNet can be configured through the embedded User Interface as a Client or as
an Access Point. This point-to-multipoint model allows multiple Ethernet endpoints
to be connected to a central Access Point. Up to 15 endpoints can be linked to a
central access point. This single radio model was designed for high throughput
point-to-point or multi-point applications and comes with an integrated 19 dBi, 17º
beamwidth antenna. The NW7[E] supports up to 240 Mbps throughput using MIMO
technology. The units can be powered by an 802.3af/at PoE compliant device or
through a sold-separately PoE injector with the second Ethernet port serving as an
IEEE802.3at power source. The NW7 is FCC certified and the NW7E is ETSI, DFS and
TPC certified.

This manual serves the following

ComNet Model Numbers:

NW7
NW7E
NWK7
NWK7E

1
2
3
...
»

Содержание NetWave NW7







































































Отзывы:

Нет отзывов

Похожие инструкции для NetWave NW7

Бренд: ZIEHL-ABEGG Страницы: 23

Бренд: THOMSON Страницы: 4

Flight Stream 110/210

Бренд: Garmin Страницы: 46

Бренд: Dusun Страницы: 8

NetVanta 6330 Series

Бренд: ADTRAN Страницы: 4

Бренд: Honeywell Страницы: 24

Notifier NFN-GW-EM-3

Бренд: Honeywell Страницы: 34

NOTIFIER ONYXWorks NFN Gateway

Бренд: Honeywell Страницы: 48

Notifier MODBUS-GW

Бренд: Honeywell Страницы: 61

Бренд: Honeywell Страницы: 4

Notifier 002-467

Бренд: Honeywell Страницы: 9

Бренд: Honeywell Страницы: 37

NOTIFIER BACNET-GW-3

Бренд: Honeywell Страницы: 42

Бренд: Honeywell Страницы: 154

ESSER IQ8Wireless Gateway

Бренд: Honeywell Страницы: 2

Бренд: Funkwerk Страницы: 594

Бренд: National Instruments Страницы: 16

HomePortal 2701HGV

Бренд: 2Wire Страницы: 21

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды