manualshive.com logo in svg

Comnet CNXE2GE2TX8MSPOE, Инструкция по установке и эксплуатации

Поделиться
Скачать
Comnet CNXE2GE2TX8MSPOE Скачать руководство пользователя страница 87

 INS_CNXE2GE2TX8MSPOE     11 Jan 2021     PAGE 87

INSTALLATION AND OPERATION MANUAL 

CNXE2GE2TX8MSPOE

TECH SUPPORT: 1.888.678.9427

6.4.3 Port Status 

This page provides VLAN Port Status 

Label 

Description 

VLAN User 

Various internal software modules may use VLAN services to configure VLAN 
port configuration on the fly. 
The drop-down list on the right allows for selecting between showing VLAN 
memberships as configured by an administrator (Admin) or as configured by 
one of these internal software modules. 
The “Combined” entry will show a combination of the administrator and 
internal software modules configuration, and basically reflects what is actually 
configured in hardware. 
If a given software modules hasn’t overridden any of the port settings, the text 
“No data exists for the selected user” is shown in the table. 

Port 

The logical port for the settings contained in the same row. 

Port Type 

Shows the port type (Unaware, C-Port, S-Port, 
S-Custom-Port.) that a given user wants to configure on the port. 
The field is empty if not overridden by the selected user. 

Ingress Filtering 

Shows whether a given user wants ingress filtering enabled or not. 
The field is empty if not overridden by the selected user. 

Frame Type 

Shows the acceptable frame types (All, Taged, Untagged) that a given user 
wants to configure on the port. 
The field is empty if not overridden by the selected user. 

Port VLAN ID 

Shows the Port VLAN ID (PVID) that a given user wants the 
port to have. 
The field is empty if not overridden by the selected user. 

Tx Tag 

Shows the Tx Tag requirements (Tag All, Tag PVID, Tag UVID, Untag All, Untag 
PVID, Untag UVID) that a given user has on a port. 
The field is empty if not overridden by the selected user. 

Untagged VLAN ID 

If Tx Tag is overridden by the selected user and is set to Tag or Untag UVID, then 
this field will show the VLAN ID the user wants to tag or untag on egress. 
The field is empty if not overridden by the selected user. 

Содержание CNXE2GE2TX8MSPOE
























































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды