Comnet CNGE5MS, Инструкция по установке и эксплуатации

Страница: 94 / 100

inS_cngE5mS_rEv–
02/19/13 PagE 94
INSTALLATION AND OPERATION MANUAL CNGE5MS
Tech SupporT: 1.888.678.9427
smtp authentication G Enable SMTP authentication switch(config)#smtp authentication
smtp account
[account] G Configure authentication account switch(config)#smtp account User
smtp password
[password] G Configure authentication password switch(config)#smtp password
smtp rcpt email
[Index] [Email address] G Configure Rcpt e-mail Address switch(config)#smtp rcpt email 1
Alert@test.com
show smtp P Show the information of SMTP switch#show smtp
no smtp G Disable SMTP function switch(config)#no smtp
event device-cold-start
[Systemlog|SMTP|Both] G Set cold start event type switch(config)#event device-cold-
start both
event authentication-
failure
[Systemlog|SMTP|Both] G Set Authentication failure event typeswitch(config)#event authentication-
failure both
event Ring-topology-
change
[Systemlog|SMTP|Both] G Set s ring topology changed event
type switch(config)#event ring-topology-
change both
event systemlog
[Link-UP|Link-Down|Both] I Set port event for system log switch(config)#interface fastethernet
3
switch(config-if)#event systemlog
both
event smtp
[Link-UP|Link-Down|Both] I Set port event for SMTP switch(config)#interface fastethernet
3
switch(config-if)#event smtp both
show event P Show event selection switch#show event
no event device-cold-start G Disable cold start event type switch(config)#no event device-
cold-start
no event authentication-
failure G Disable Authentication failure event
typ switch(config)#no event
authentication-failure
no event ring-topology-
change G Disable ring topology changed
event type switch(config)#no event ring-
topology-change
no event system log I Disable port event for system log switch(config)#interface fast
Ethernet 3
switch(config-if)#no event system
log
no event smpt I Disable port event for SMTP switch(config)#interface fast
Ethernet 3
switch(config-if)#no event smtp
show system log P Show system log client & server
information switch#show system log