Comnet CNGE2FE24MS, Инструкция по установке и эксплуатации

Страница: 131 / 142

124
Port Mirroring Commands Set
Netstar Commands Level Description Example
monitor destination
[Port ID]
G Set destination port switch(config)# monitor
destination 1
monitor source
[Port ID]
G Set source port switch(config)# monitor source 2
monitor mode
[RX|TX|Both|Disabled]
G Configure mode of
monitor function
switch(config)# monitor mode rx
show monitor P Show port monitor
information
switch# show monitor
802.1x Commands Set
Netstar Commands Level Description Example
8021x enable G Use the 802.1x global
configuration command
to enable 802.1x
protocols.
switch(config)# 8021x enable
8021x system
radiousip [IP address]
G Use the 802.1x system
radious IP global
configuration command
to change the radious
server IP.
switch(config)# 8021x system
radiousip 192.168.1.1
8021x system
serverport [port ID]
G Use the 802.1x system
server port global
configuration command
to change the radious
server port
switch(config)# 8021x system
serverport 1812