Comnet CNGE2FE24MS, Инструкция по установке и эксплуатации

Страница: 128 / 142

121
no multicast-filtering
[IP-Addr][VID]
I
Remove multicast
filtering entry of
interface
switch(config)# interface
fastEthernet 2
switch(config-if)# no multicast-
filtering 239.0.0.1 1
no multicast-filtering
[IP-Addr][VID]
G
Remove multicast
filtering entry
switch(config)# no multicast-
filtering 239.0.0.1 1
show multicast-
filtering
I
Show multicast filtering
table
switch# show multicast-filtering
SNMP Commands Set
Netstar Commands Level Description Example
snmp system-name
[System Name]
G Set SNMP agent
system name
switch(config)# snmp system-
name l2switch
snmp system-location
[System Location]
G Set SNMP agent
system location
switch(config)# snmp system-
location lab
snmp system-contact
[System Contact]
G Set SNMP agent
system contact
switch(config)# snmp system-
contact where
snmp agent-mode
[v1v2c|v3|v1v2cv3]
G Select the agent mode
of SNMP
switch(config)# snmp agent-mode
v1v2cv3
snmp community-
strings [Community]
right
[RO/RW]
G Add SNMP community
string.
switch(config)# snmp community-
strings public right rw
snmp-server host
[IP address]
community
[Community-string]
trap-version
[v1|v2c]
G Configure SNMP
server host information
and community string
switch(config)# snmp-server host
192.168.1.50 community public
trap-version v1
(remove)
Switch(config)# no snmp-server
host 192.168.1.50