INS_CNGE28FX4TX24MS(2,POE2/48)
04/30/18 PAGE 49
INSTALLATION AND OPERATION MANUAL
CNGE28FX4TX24MS(2,POE2/48)
TECH SUPPORT: 1.888.678.9427
Table 4-14. L2 Switching > Port Mirror
Item
Description
Session ID
Click the drop-down menu to select a port mirroring session from the list. The
number of sessions allowed is platform specific.
Monitor session state Click the drop-down menu to enable or disable the session mode for a selected
session ID.
Destination Port
Click the drop-down menu to select the destination port and receive all the traffic
from configured mirrored port(s).
Allow-ingress
Click the drop-down menu to enable or disable the Allow-ingress function.
Sniffer RX Ports
Enter the variable to define the RX port.
Sniffer TX Ports
Enter the variable to define the TX port.
Apply
Click Apply to save the values and update the screen.
The ensuing table for Mirror Status settings are informational only: Session ID, Destination Port,
Ingress State, Source TX Port and Source RX Port.
4.5.3 Link Aggregation
Link Aggregation is a method for combining multiple network connections in parallel in order to
increase throughput beyond the capability of a single connection, and to provide redundancy in
case one of the links should fail.
Load Balance
The Load Balancing page allows you to select between a MAC Address or IP/MAC Address
algorithm for the even distribution of IP traffic across two or more links.
To access this page, click L2 Switching > Link Aggregation > Load Balance.
Figure 4-17. L2 Switching > Link Aggregation > Load Balance
Table 4-15. L2 Switching > Link Aggregation > Load Balance
Item
Description
Load Balance
Algorithm
Select the radio button to select the Load Balance Setting: MAC Address or IP/MAC
Address.
Apply
Click Apply to save the values and update the screen.
The ensuing table for Load Balance Information settings are informational only: Load Balance