manualshive.com logo in svg

Comnet CNGE28FX4TX24MS2, Инструкция по установке и эксплуатации, Страница: 15 / 154

Поделиться
Скачать
Comnet CNGE28FX4TX24MS2 Скачать руководство пользователя страница 15

INS_CNGE28FX4TX24MS(2,POE2/48)

04/30/18     PAGE 15

INSTALLATION AND OPERATION MANUAL 

CNGE28FX4TX24MS(2,POE2/48)

TECH SUPPORT: 1.888.678.9427

2.4. Verifying Switch Operation

Before installing the device in a rack or on a wall, power on the switch to verify that the switch 
passes the power-on self-test (POST). To connect the cabling to the power source see “Power 
Supply Installation” on page 15.

At startup (POST), the System LED blinks green, while the remaining LEDs are a solidy green. 
Once the switch passes POST self-test, the System LED turns green. The other LEDs turn off and 
return to their operating status. If the switch fails POST, the System LED switches to an amber 
state.

After a successful self-test, power down the switch and disconnect the power cabling. The switch 
is now ready for installation on its final location.

Содержание CNGE28FX4TX24MS2



























































































































































Отзывы:

Нет отзывов