INS_CNFE3TX2CXMS(U,E)_REV– Rev. 7.11.18 PAGE 15
QUICK START GUIDE
CNFE3TX2CXMS(U,E)
TECH SUPPORT: 1.888.678.9427
Management Interface
5.1 Installation
Before installing the router, you need to be able to access the router via a computer equipped
with an Ethernet port.
Follow the steps below to install and connect the Router to PCs:
Step 1: Select power source. The router can be powered by +12~48V DC power input, or via a PoE
(Power over Ethernet) PSE Ethernet switch.
Step 2: Connect a computer to the router. Use either a straight-through Ethernet cable or cross-
over cable to connect the ETH1 port of the router to a computer. Once the LED of the LAN
port lights up, which indicates the connection is established, the computer will initiate a
DHCP request to retrieve an IP address from the AP router.
Step 3: Configure the router on a web-based management utility. Open a web browser on your
computer and type http://192.168.10.1 (default router IP of the router) in the address box
to access the webpage. A login window will pop up where you can enter the default login
name admin and password admin. For security reasons, we strongly recommend you to
change the password. Click on System Tools > Login Setting after logging in to change the
password.
After you log in successfully, a Web interface will appear, as shown below. On the left hand side
of the interface is a list of functions where you can configure the settings. The details of the
configurations will be shown on the right screen.
