***** IMPORTANT *****
The reversing motor pump you have purchased is a reliable, high quality product that will give
you many years of trouble-free service. To ensure that you get the most from your purchase,
read this installation and instruction manual carefully. By following the step-by-step procedure
and using only basic tools and materials, you will find the installation easy to do.
This Pump is not watertight and therefore is not warranteed against water damage.
If you are installing this pump on a Capilano or Syten steering system, you probably have
a 3 line steering system. Read the 3 line steering installation instructions carefully.
TOOLS AND MATERIAL REQUIRED TO INSTALL PUMP
1. Basic Tool Kit
2. Pipe
Cutter
3. Funnel with Filter (a coffee filter will do)
4. 3/8" Electrical Drill
5. 2 Gallon Bucket (to catch excess oil)
6. Rags or Paper Towels
7. *Pipe
Fittings
(check with steering gear manufacturer for type and size)
8. *Tubing
(check with steering gear manufacturer for type and size)
9. *Hydraulic
Oil
(check with steering gear manufacturer for type)
10. Teflon Based Thread Sealer (such as LOCKTITE P.S.T.)
11. Miscellaneous Hardware (for mounting pump and securing lines)
*Consult with your steering system manufacturer to get detailed information regarding
factory authorized installation materials. Failure to do so could void your warrantee.
29010015V1.0(15CI & 25CI Pumps).doc
1
