background image

 

 CLOUD 4 and CLOUD 6 – Installation Guide 

 

14 

       PAINTING THE SPEAKER 

           

CONTACT US  

Community Professional Loudspeakers - Transferable Limited Warranty 

 

Community CLOUD 4 and CLOUD 6 loudspeakers are warranted for five (5) years from the date of 
sale to the original purchaser. 
 

Who is protected? 

Your Community warranty protects the original owner and all subsequent owners. The original bill of 
sale must be presented whenever warranty service is required. 

 
What is covered? 

Community loudspeakers are warranted to be free from defects in material or workmanship provided 
that the product has not been subjected to abuse or accident or altered in any way.  
 
Any part of the product covered by this warranty that, with normal installation and use, becomes 
defective will be repaired or replaced by Community, at our option, provided the product is shipped 
insured and prepaid to Community at the address below.  The product will be returned to you freight 
prepaid. 
 
This warranty does not extend to any of our products that have been subjected to misuse, improper 
storage, neglect, accident, improper installation, or have been modified or repaired in any manner 
that Community believes may affect the reliability of the product, or where the serial number or date 
code has been removed or defaced. 
 
THE FOREGOING LIMITED WARRANTY IS COMMUNITY’S SOLE AND EXCLUSIVE WARRANTY 
AND THE PURCHASER’S SOLE AND EXCLUSIVE REMEDY.  COMMUNITY MAKES NO OTHER 
WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED AND ALL IMPLIED WARRANTIES 
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY 
DISCLAIMED AND EXCLUDED. 
 
Community’s liability arising out of the manufacture, sale or supplying of products or their use or 
disposition, whether based upon warranty, contract, tort or otherwise, shall be limited to the price of 
the product. In no event shall Community be liable for special, incidental or consequential damages 
(including, but not limited to, loss of profits, loss of data, or loss of use damages) arising out of the 
manufacture, sale or supplying of products, even if Community has been advised of the possibility of 
such damages or losses. 
 
Products that are out of warranty will also be repaired by the Community Service Department. The 
parts and labor involved in these repairs are warranted for 90 days when repaired by Community.  All 
shipping charges in addition to parts and labor will be at the owner’s expense

 
 
 

 
 
 
 
 

 

Community Professional Loudspeakers 
333 East 5

th

 Street, Chester, PA 19013-4511, U.S.A. 

(610) 876-3400 · (800) 523-4934 
www.loudspeakers.net 

Содержание CLOUD 4


















Отзывы: