I SERIES
Community Professional Loudspeakers
communitypro.com
IUB-WRG_Manual 17SEP2018
LOUDSPEAKER WEIGHTS
FULL-RANGE
600 Level [lbs (kg)] 800 Level [lbs (kg)]
SUBWOOFER
600 Level [lbs (kg)] 800 Level [lbs (kg)]
IP6/8-1122WR
52.0 (23.6)
42.0 (19.1)
IS6/8-112WR
53.0 (24.0)
47.0 (21.3)
IP6/8-1152WR
63.0 (28.6)
52.0 (23.6)
IS6/8-115WR
62.0 (28.1)
56.0 (25.4)
IP8-1153WR
-
80.0 (36.3)
IS6/8-118WR
75.0 (34.0)
76.0 (34.5)
IP8-0002WR
-
49.0 (22.2)
IS6/8-212WR
81.0 (36.7)
69.0 (31.3)
IP8-1151WR
-
40.0 (18.1)
IS6/8-215WR
98.0 (44.5)
86.0 (39.0)
IS6/8-218WR
131.0 (59.4)
133.0 (60.3)
GENERAL ASSEMBLY INFORMATION
The BalancePoint™ Flyware kits for the I SERIES loudspeakers are
modular and can be combined in a number of ways.
The most common
configuration of each kit is shown along with instructions for assembly.
TOOLS NEEDED FOR ASSEMBLY:
• Metric socket and ratchet set
• Metric wrench set
• Metric hex key set
The loudspeaker enclosure must
have fasteners in all threaded holes
SAFETY CABLES
IMPORTANT:
Attach a safety cable to one of the unused mounting points
on the loudspeaker (and/or the bracket assembly). Safety cables must
be secured to a suitable load-bearing point separate from the loudspeaker
mounting point, with as little slack as possible, oriented to minimize dynamic
swinging of the load, so as not to develop undue shock or kinetic force if the
loudspeaker mount were to fail. Safety cables and hardware are not included.
Please consult a structural engineer for the appropriate cables, hardware, and
location(s) for the load and application.
Hardware and Parts:
There is a key at the beginning of each instruction
that shows the parts, their quantity and abbreviation. We also use a
shortened code for the hardware that offers an easy reference to the
type, diameter and approximate length.
ex: HW1 = Hardware Washer 10mm;
HH1-4 = Hardware, Hex head bolt, 10 x 40mm
IMPORTANT:
The flat head bolts that come installed in each
enclosure must remain in place or be replaced by a threaded
fastener from an array bracket. The bolts attach to internal metal
brackets that are critical to the structural integrity and rated Safe Working
Load (SWL) of each point and each array assembly. Failure to include a
fastener in every location could lead to serious injury, or even death.
Typical placement for safety cable
and hardware (eyebolt not included)
