I SERIES
BalancePoint™ Flyware
Page 3
U-BRACKETS
IUB1122WRG
- U-Bracket for IP6/8-1122WR, IS6/8-212WR
IUB1152WRG
- U-Bracket for IP6/8-1152WR
IUB1153WRG
- U-Bracket for IP8-1153WR, IS6/8-215WR,
IS6/8-218WR
IUB0002WRG
- U-Bracket for IP8-1151WR, IP8-0002WR,
IS6/8-115WR, IS6/8-118WR
IUB112SWRG
- U-Bracket for IS6/8-112WR
APPLICATION:
Mount and aim single loudspeakers from ceilings, walls, trusses,
floors, etc in portrait or landscape orientation.
Before assembly:
Adhere the rubber washers to the inside of the yoke (aligned
with cabinet mounting points).
Note:
The yoke can be attached to the building structure and then the
loudspeaker can be installed later.
Figure 1.
Remove middle cabinet bolts and attach yoke to cabinet
2
Fully tighten
all
connections
1
Mounting Detail
Parts:
UB:
U-Bracket
Hardware:
Qty
Code
Description
4
HH1-4
10 x 40 mm Hex Hd Bolts
4
HW1
10 mm Flat Washers
4
HL1
10 mm Lock Washers
4
HW8-4
8mm ID x 40mm OD
Black Rubber Washer
2
HS6
6 x 35 mm Socket Hd Bolts
2
HW6
6 mm Flat Washers
2
HL6
6 mm Lock Washers
2
HW.25
1/4" ID x 5/8" OD
Black Rubber Washer
IMPORTANT:
The WR U-brackets can only be
used with I SERIES WR models.
Kit Weights:
IUB1122WRG: 16.0 lb (7.3 kg)
IUB1152WRG: 17.0 lb (7.7 kg)
IUB1153WRG: 22.0 lb (10.0 kg)
IUB0002WRG: 17.0 lb (7.7kg)
IUB112SWRG: 10.0 lb (4.5 kg)
UB
Trapezoid Cabinet Installation (IP6/8)
or Center Point Subwoofer Connection (IS6/8)
HW1
HL1
HH1-4
HW8-4
UB
HW6
HS6
HW.25
HL6
IUB-1122WRG
on an IP8-1122WR
IUB-0002WRG
on an IS6-115WR
