Model 2 Classic
13
21
Use tall panels to create the third layer.
Add connector rings as you go so each
panel is captured by four rings and will
not fall down. You may want to stand
on the platform to do this.
22
Check all joints. Make sure all panels
are where you want them to be. Then
fill the hole between platform using a
circular plug. Step on the plug to lock
it in place.
23
Screw a cap onto each post to lock
construction together. You will hear
a clicking sound as you turn the cap;
screw it all the way down.
24
Check that all post feet are firmly on
the floor. If a post needs lengthening,
turn the rubber foot clockwise until the
post is anchored.
