Community Playthings
Brightling Road, Robertsbridge, TN32 5DR UK
Phone: 0800 387 457
www.communityplaythings.co.uk [email protected]
Retain these instructions for future reference.
© 2011 by Community Products (UK) Ltd
FS69 Eu 0514 Revision 07
IMPORTANT
Hide-away wheels
The hide-away wheels can be engaged and disengaged using
the following procedure:
1. With one person at each end, tip the unit slightly for-
ward or back. This allows the toe trim to pivot.
2. While one person holds the
item in the tipped position,
the other rotates the toe
trim by pulling or pushing
on one of the hand-holds
at either end of the toe trim
to engage or disengage the
wheels.
3. Tip the unit slightly to the
other side and repeat the procedure with the other toe
trim
NOTE: To prevent objects from falling off shelves, tip unit
back and engage the front wheels first. When disengaging
wheels, tip unit forward, and release rear wheels first.
CAUTION
c
When engaging or disengaging the wheel system, always
use two people. Failure to do this could cause back strain
or pinching of your hands.
c
Always use the hand-holds provided at each end of the
toe trim.
WARNING
c
When moving the Changing table, always push from an
end.
c
Never move with children nearby.
c
Always disengage wheels after moving.
Maintenance
Periodically inspect for cracks, breaks, loose parts, missing
parts, and/or malfunctions. Remove the product from service
when any condition develops that might make operation
unsafe.
Occasionally use a light oil on the moving metal parts of the
step assembly. Do not oil the plastic parts.
Over time the gas spring that lifts the steps may lose pressure.
This could cause failure of the steps to close and latch. If this
happens, call Customer Service for a replacement.
Cleaning
Wipe wood surfaces with a damp cloth and mild detergent.
Dry immediately. Leaving water or cleaning agent on the
surface may damage the finish. Do not use solvent cleaners
on any parts of your Changing table.
The contoured pan can be washed with soap or mild deter-
gent and water. Iodine products will discolour the pan and
pine oil based cleaners may weaken the surface. Do not use
rubbing alcohol to clean the surface.
Steps should be wiped periodically to remove dirt or sand
which may prevent the proper functioning of the moving
parts.
Construction
The wooden components are manufactured from solid birch
and birch plywood protected with a child-safe finish.
The metal treads are finished with anti-slip paint.
User Modifications
We cannot be responsible for modifications made by custom-
ers to our products in the field without our supervision, test-
ing, or evaluation.
Ordering Parts
To order replacement parts, contact Customer Service with a
description of the part(s) needed and the ID Code from the
product.
Use only replacement parts supplied by
Community Playthings.
