7950 Pager
Manual
Page
8
©
Commtech
Wireless
2.3.2
Reading an Incoming Message
(1)
The message will be displayed on the screen. Press any button to stop the alert.
Note:
A flashing in the right corner of the screen indicates the message is continued on an
additional screen (s). Press
to display the rest of the message.
(2)
Press
to exit.
2.3.3
Reading a Stored Message
(1)
From the Message-status screen press
or
to move the cursor to the message you want to
read.
(2)
Press
to read the message.
2.3.4
Message Reading Features
Press
or
while reading a message to read the previous or next message.
Note
: When an unread message exists, your pager gives a periodic reminder alert until all unread
messages are read.
2.3.5
Message Preview
This feature allows you to scan the first line of your messages.
(1)
Use the
or
buttons to move the cursor through your messages.
Note:
Previewing an unread message does not remove the unread message status from the message.
2.3.6
Automatic Message Deletion
Note: Stored message differ from locked messages. They can be deleted or overwritten when the
pagers memory is full and a new message is received. If all 50 messages slots are full and a new
message is received, the oldest, unlocked, un-alarmed, and previously read message is automatically
deleted when a new message is received.
Note:
To prevent specific messages from being deleted, you can lock them. Then you can delete all
other messages you no longer need to prevent the pagers memory from becoming full.
2.3.7
Duplicate Message
If the same message is received more than once, DUPLICATE MESSAGE is displayed at the beginning
of the new message. The new duplicate message replaces the older duplicate message and contains
the latest time and date stamp.
