7950 Pager
Manual
Page
10
©
Commtech
Wireless
Example of Set-Message-Alarm Screen
The alarm symbol shows the current alarm status.
is displayed if the message alarm is enabled,
is displayed if the message alarm is disabled.
(5) Press
until
is displayed.
(6) Press
to move the cursor to the hour digits.
(1)
Press
to adjust the hour digits.
(2)
Repeat steps 6 and 7 to adjust the minutes, AM/PM/24 hr, and date.
(3)
Press to activate your selection.
You can also set a message alarm while reading the message by following steps 2 through 9 above.
2.6.2
Set Daily Message Alarm
(1)
Follow steps 1 through 8 to set the message alarm time.
(2)
When setting the date in step 8, press
until you see double dashes for the month, day and
year (--/--/--).
(3)
Press to activate your selection. The alarm is now set to alert every day at this specified time.
2.7
Backlight
You can manually turn the backlight on or off at any time by pressing and holding any key for two
seconds. The backlight automatically turns off when the pager returns to the Standby screen or when
holding any key for two seconds again.
2.8
Low Battery Indication
When the energy level of the battery is low, the battery icon will change from
to
. An
audio alert sounds every 4 minutes.
2.9
Display Zoom
When this feature is enabled, the standard 4-line display is converted to a 2-line display. The
characters are enlarged vertically for increased message readability.
(1)
From the Function menu, press
to move the cursor to
(Zoom 2) or
(Zoom 3) or
(Zoom 1)
(2)
Press
, and display zoom is now active.
All new and stored messages including notebook messages are displayed in the new format.
