background image

7950 Pager 

 

Manual

 

Page 

2

 

 

© 

Commtech

Wireless

 

 

NOTICE 

This  manual,  software  and  electronic  circuitry  are  copyrighted.    All  rights  reserved.    Under  the  copyright 
laws, this manual, software and electronic circuitry may not be copied, in whole or in part without written 
prior consent of Commtech Wireless. 
All information provided in this document is carefully prepared and offered in good faith as a guide in the 
installation,  use  and  servicing  of  our  products.    Installers  must  ensure  that  the  final  installation  operates 
satisfactorily within the relevant regulatory requirements.  Commtech Wireless accepts no responsibility for 
incorrect  installation.    Commtech  Wireless  reserves  the  right  to  change  products,  specifications,  and 
installation data at any time, without notice. 
Commtech  Wireless  makes  certain  limited  warranties  with  respect  to  defective  diskettes,  documentation 
and electronic circuitry.  Please see the associated information contained on this page.   

SOFTWARE LICENSE STATEMENT 

This  manual,  software  and  electronic  circuitry  are  protected  by  international  copyright  laws.    Under  the 
copyright laws, this manual, software and electronic circuitry may not be copied, in whole or in part without 
written prior consent of Commtech Wireless, except in the normal use of the software to make an archival 
copy of the software for the sole purpose of backing up the software and protecting your investment from 
loss or damage. 

LIMITED WARRANTY 

With  respect  to  the  physical  documentation  and  physical  electronic  circuitry  enclosed  herein,  Commtech 
Wireless  warrants  the  same  to  be  free  of  defects  in  materials  and  workmanship  for  a  period  of  one  year 
from the date of purchase.  In the event of notification within the warranty period of defects in material or 
workmanship,  Commtech  Wireless  will  replace  the  defective  diskettes,  documentation  and  electronic 
circuitry.  The remedy for breach of this warranty shall be limited to replacement and shall not encompass 
any other damages, including but not limited to loss of profit, and special, incidental, consequential, or other 
similar claims. 
Commtech  Wireless  specifically  disclaims  all  other  warranties,  expressed  or  implied,  including  but  not 
limited to implied warranties of merchantability and fitness for a particular purpose with respect to defects 
in  the  documentation  and  electronic  circuitry,  and  the  program  license  granted  herein,  in  particular,  and 
without limiting operation of the program license with respect to any particular application, use, or purpose. 

COMPLIANCE NOTICES 

AUSTRALIA:  Where  applicable,  to  ensure  compliance  with  ACA  Technical  Standards,  this  equipment  is 
labeled  with  a  Telecommunications  Compliance  Label.    For  safety  reasons,  this  equipment  should  only  be 
connected to compliant telecommunications equipment in accordance with the manufacturer’s instructions. 
NORTH AMERICA:  Where applicable, this equipment has been tested and found to comply with FCC Rules 
and Regulations, Part 15 with the limits of a Class B digital device, designed to provide reasonable protection 
against harmful interference.  This equipment generates, uses and can radiate frequency energy and if not 
installed  and  used  in  accordance  with  the  instructions,  may  cause  interference  harmful  to  radio 
communications.    On  the  base  of  the  equipment  is  a  label  containing  an  FCC  Registration  Number,  if 
applicable. 

 

Содержание 7950

















Отзывы: