FIGURE 3 Modify the SZ144-D Host Name
10. When the prompt
“Do you want to modify the
SZ144-D hostname ([SZ144-D])? (y/n)
appears,”
enter n to keep the default host name or y to change it. If you
entered y, the next prompt asks you to enter the new host
name.
The next prompt asks you to choose the IP version you want
to support on the network.
11. Enter 1 to support IPv4 only, or enter 2 to support both IPv4
and IPv6.
The next prompt asks you to choose how you want to set up
the management interface IP address.
FIGURE 4 Management Interface Setup
12. Enter 1 if you want to manually assign an IP address to the
management interface, or enter 2 to automatically obtain an
IP address from a DHCP server on the network.
If you entered 1 (Manual), the next prompt asks you to enter
the IP address settings that you want to manually assign.
The next prompt asks you to confirm that you want to apply
the IP address settings that you configured at the previous
prompts.
13. Enter y to confirm and continue.
The next prompt asks you to choose how you want to set up
the data interface IP address.
FIGURE 5 Data Interface Setup
14. Enter 1 if you want to manually assign an IP address to the
data interface, or enter 2 to automatically obtain an IP
address from a DHCP server on the network.
If you entered 1 (Manual), enter the IP address settings that
you want to manually assign.
The next prompt asks you to enter the primary DNS server
address.
FIGURE 6 DNS Server Settings
15. At the
Primary DNS
prompt, enter the IP address or host
name of the primary DNS server that you want SZ144-D to
use.
The next prompt asks you to enter the secondary DNS server
address.
16. At the
Secondary DNS
prompt, enter the IP address or
host name of the secondary DNS server that you want SZ144-
D to use.
The next prompt asks you to confirm that you want to apply
the IP address settings that you configured in the previous
prompts.
17. Enter y to confirm and continue.
The message “Apply networking configuration...” appears.
18. At the Data Interface external NAT IP prompt, enter the public
IP address of the NAT server (if you have one) on the
network. If you do not have a NAT server on the network,
leave the field blank and simply press Enter.
The next prompt asks you if you want SZ144-D to
automatically discover a vSZ controller on the network using
DHCP Option 43 (if you have configured this on your DHCP
server).
19. Enter y to use DHCP Option 43 or enter n to manually enter
the vSZ controller’s IP address.
If you entered n, the next prompt asks you for the control IP
address of the vSZ controller with which you want this SZ144-
D instance to join.
20. Enter the IP address of the controller and press Enter.
Make sure the SZ144-D management IP address and vSZ
control IP address are reachable to each other. The data
plane validates the IP address if it is reachable. The next
prompt asks you if you want to connect to vSZ.
21. Enter y to confirm and continue.
The next prompt asks you for the new password.
22. At the
new password
prompt, enter the password that
you want to assign to the SZ144-D management interface.
The message
Setup SZ144-D Done !!
appears. You
have completed setting up SZ144-D on the network.
FIGURE 7 SZ144-D Setup Complete
Step 3: Approve SZ144-D to Register with the vSZ
Controller
The last step is to approve SZ144-D to allow it to join the vSZ
controller on the network.
1. Log on to the web interface of the vSZ controller with which
you want SZ144-D to register.
2. Go to System > Cluster.
The Cluster page appears.
3. Scroll down to the Data Planes section.
4. Select the SZ144-D instance that you deployed from the list,
and then click Approve.
You have completed approving SZ144-D to register with vSZ.
Upgrading SZ144-D
SZ144-D is shipped with SmartZone 5.2.1. As vSZ manages SZ144-
D, ensure that vSZ has the same or later version than SZ144-D.
Otherwise, upgrade vSZ before upgrading SZ144-D.
1. Log on to the web interface of the vSZ controller with which
you have registered SZ144-D.
Copyright
©
2020 CommScope, Inc. All rights reserved.
Page 2 of 3
Published August 2020, Part Number 800-72550-001 Rev C
