2. Go to Administration > Upgrade.
The Upgrade tab page appears.
3. Select the DP Patch tab.
The DP Patch page appears.
4. Select the SZ144-D tab.
5. In Patch File Upload, click Browse to select the patch file
(.ximg file).
6. Click Upload, and the patch file is uploaded.
7. From the Data Planes section, select the data plane that you
defined on
on page 2 and click Upgrade.
8. Click Apply to apply the patch file version to the SZ144-D.
You have successfully upgraded the data plane.
Related Documentation
If you need more information about the SmartZone 144 Data
Plane or the SmartLicense platform, refer to the following
documents, which are available for download on the RUCKUS
Support website:
• For information on how to perform advanced configuration
tasks and AP management and monitoring, refer to the vSZ-H
Administrator Guide.
• For a complete list of documentation on the SmartZone 144
Data Plane, refer to the release notes.
• For more information on how to manage your SmartZone 144
Data Plane licenses, refer to the SmartLicense User Guide.
• You can configure the SZ144-D from the command line
interface (CLI). For information on how to use the CLI to
configure the SZ144-D, see the SmartZone100-D / vSZ-D
Command Reference Guide.
©
2020 CommScope, Inc. All rights reserved.
ARRIS, the ARRIS logo, COMMSCOPE, RUCKUS, RUCKUS WIRELESS, the Ruckus
logo, and the Big Dog design are trademarks of CommScope, Inc. and/or its
affiliates. Wi-Fi Alliance, Wi-Fi, the Wi-Fi logo, Wi-Fi Certified, the Wi-Fi
CERTIFIED logo, Wi-Fi Protected Access, the Wi-Fi Protected Setup logo, Wi-Fi
Protected Setup, Wi-Fi Multimedia and WPA2 and WMM are trademarks or
registered trademarks of Wi-Fi Alliance. All other trademarks are the property of
their respective owners.
Copyright
©
2020 CommScope, Inc. All rights reserved.
Page 3 of 3
Published August 2020, Part Number 800-72550-001 Rev C
