6
3.5 26W cable on main cable port installation
3.5.1
Position the cable onto the closure.
Note:
Make sure the outer jacket end meets the port end-
face as shown.
4
Micro Duct Connections
4.1 Install connectors from bottom side micro ducts.
4.2 Install the connectors onto the feeder cable micro
ducts.
4.3 Mark the drop cable at the connector.
4.4 Cut the micro ducts at the mark.
4.5 Connect the micro ducts with connectors.
4.6 Repeat steps 4.1-4.5 to connect all the feeder micro
ducts to drop micro ducts.
