5
3.3.3
Install the top 1pc 1W cables (or dummy rods)
and 4W/7W cable
.
Note
: For dummy rod installation, fit the dummy rod end
at the slots as shown.
3.3.4
Install the 4W gel block cover.
Note:
There is no additional gel block cover for 7W cable,
it is suitable for the original gel block in closure cover.
3.4 12W cable installation
12W cable in drop cable port
3.4.1
Install the 12W drop gel block with click two
snaps.
3.4.2
Position the cable onto the closure.
Note:
Always make sure the outer jacket end meets the
gel port surface.
12W cable in main cable port
3.4.3
Install the left and right 12W adapters onto the
closure.
3.4.4
Position the 12W cable onto the closure and
close the adapters.
