ADCP-93-103 • Issue 3 • November 2016
Page 4
© 2017
CommScope
. All Rights Reserved.
Every panel has a rear splice area such as shown in
Figure 4
.
23207-A
O
S
P OR IFC
CABLE CLAMP
S
PLICE
TRAY
S
S
PLICE TRAY
ACCE
SS
DOOR
CABLE RING
(TYPICAL)
RIBBON
FANOUT
BRACKET
Figure 4. Main Internal Features (Rear View)
From top left counterclockwise, the main features in the rear splice area are as follows:
• Cable Ring—routes and secures stranded or ribbon cable on entry into splice area.
• Splice Trays—secure and protect splices.
• Splice Tray Access Door—folds down providing a horizontal splice deck.
• Ribbon Fanout Bracket—holds one stack of four fanout chips.
• OSP or IFC Cable Clamp—secures the cable to the panel.
Each panel is shipped with a cable clamp as well as vertical cable guides and cable shields (two
of each, not shown). Accessories available for the panel include patch cords, heatshrink- or
mass-fusion splice chips, and cable clamps (if additional clamps are needed).
