FOWB
I N S T A L L A T I O N I N S T R U C T I O N
Fiber optic wall box
3.1
To open the lid press the grooved area in the middle of the
bottom side of the lid (as shown) and pull the lid upwards. The lid will
lock in place at approximately 120°.
1 General
The box is designed for indoor applications for a maximum of 12/24
fibers. Up to 12 SC or 12 LC duplex adapters can be inserted. The
box can be mounted onto a wall or into a 19“ rack.
An additional metal base plate can be used to secure bigger cables (Ø
7-14 mm) outside of the box.
The box provides cable entrances (Ø ≤7mm) on the top and bottom
side of the box.
An additional cover is provided to protect the connectors from
accidental disconnection.
A fold-away splice cassette inside, can support a maximum of 24 crimp
splices, 24 heat shrinkable splices or 12 mechanical splices.
2 Kit content
• 1 x Box
• 1 x Cover for F/O plugs
• 1 x Base plate
• 1 x Strain relief for cable
• 1 x Crimp splice holder 18
• 1x Splice holder 6
• 3 x Screw 5x30-A2
• 3 x Wall plug
• 1 x Tie wrap
3 Installation of the box
TC-1195-IP
Rev A, Apr 2017
www.commscope.com
