17
12.1
For each added cable use a
FOSC-A-CSEAL-1-NT. Proceed for each cable
as outlined in section 11.
12.2
After completion of splicing
(section 7), re-install the dome and the sealing
ring.
11.12
Wait until the sleeve is cool to the
touch before moving the cables.
11.13
After completion of splicing
(section 7), re-install the dome and the sealing
ring (see section 9).
12
Additional cable installation
13.1
Short splices
(e.g. Raychem SMOUV 1120-02 and -03).
13
Other capabilities of
splice holder
14.1
Position the two dome mounting
brackets on the dome of
FOSC-A/B-POLE-MOUNT. Clamp the brackets
into the pole mounting brackets and secure it
with the locking pin.
14
Mounting kit
15.2
Insert the unused buffer tubes into the
loose tube storage sleeve. Use tie wraps to
secure the storage sleeve.
15
Loose tube storage sleeve
15.1
Detach the organizer tray from the
FOSC base by squeezing the tray pins and
slip the tray out of the bracket.
