Configuring the System with RF
FWPP-504-02
FlexWave
®
Prism Remote Unit and RF Module Installation Guide
© May 2017 CommScope, Inc.
Page 25
Figure 8.
Legacy Dual-Bay 40W RF Module in a Quad-Bay PRU
NOTE:
If a Legacy Dual-Bay 40W RF Module AWS 2100 and a Legacy Dual-Bay 40W RF Module PCS 1900 are
both installed in a Quad-Bay PRU, it is recommended that the PCS 1900 be installed in upper-most bay,
and the AWS 2100 be installed in the lower-most bay.
NOTE:
To accommodate two-bay modules, you need to remove a module bay shelf as described in
"Dual-Bay
Modules Only—Remove the Module Bay Shelf” on page 89
.
Legacy Dual-Bay 40W RF Module
in Bay B (upper slot) and
Bay A (lower slot) with the
controlling DART in Bay B
AC or DC power switch
Four DC power switches
SeRF Module and Power supplies
Bay C (empty for future use)
Bay D (empty for future use)
Fans
Connecvity panel with Status LED