CommScope Era CAP M 17E, Руководство по установке

Страница: 41 / 60

M0201AJB Era
™
Medium Power Carrier Access Point Installation Guide
© October 2018 CommScope, Inc. Page 37
Installing CAP Ms
14
Use both handles on the CAP M-2 chassis to lift it above the Mounting Bracket with the back of its chassis
facing the back of CAP M-1, and then lower it into place.
•
The M6 pins that you loosened in Step 13 on page 36 must align with the Mounting Bracket slots, as
shown below.
•
The washer for each M6 pin should be next to the CAP M-2 chassis (inside the bracket).
15
On the right side of the CAP M-2, torque the M6 pin to 11 N-m.
16
Repeat Step 15 on the left side of the CAP M.
CAP M-2
(back of the CAP M-2 chassis
faces the back of CAP M-1)
M6 Pin with its
washer on the inside
of the bracket,
against the
CAP-M2 chasssis