CommScope ADCP-90-326 Скачать руководство пользователя страница 2

Страница: 2 / 26

ADCP-90-326 • Rev B • November 2020

Page 2

6.4Termination and Storage FMT Configuration15

6.4.1

12-Position Termination and Storage Tray, Universal Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

6.4.2

16-Position Termination and Storage Tray, Universal Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

6.4.3

24-Position Termination and Storage Tray, Left/Right Storage. . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

6.5

Bulk Storage Only FMT Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

6.6

12-Position Termination and Splice Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

7.1

Opening Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

7.2

Accessing Sliding Adapter Packs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

7.3

Accessing Bulkhead Plate Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

7.4

Closing the Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

CUSTOMER INFORMATION AND ASSISTANCE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

INTRODUCTION

This manual describes the CommScope Fiber Management Tray-D (FMT-D) and provides all
information required to install and use this product.

The FMT is a fiber optic tray that provides a variety of rack-mount and functional options. All
options are covered in this manual to the extent of relevance when the FMT is installed and used.

Revision History

Trademark Information

CommScope (logo) and CommScope are trademarks of CommScope, Inc.

Content

Page

ISSUE

DATE

REASON FOR CHANGE

Issue 1

11/2001

Original.

Issue 2

04/2003

Revised to reflect changes in product design.

Issue 3

06/2004

Add attenuator information.

Issue 4

06/2005

New spring lock and mounting brackets. Update cable routing.

Rev B November 2020 Changed to CommScope format.

Содержание ADCP-90-326



























Результаты поиска

Содержание ADCP-90-326

Отзывы:

Похожие инструкции для ADCP-90-326

Бренды по названию

Популярные бренды

CommScope ADCP-90-326, Руководство пользователя

Результаты поиска

Содержание ADCP-90-326

Отзывы:

Похожие инструкции для ADCP-90-326

Бренды по названию

Популярные бренды