www.commscope.com
860538982
Instruction Sheet
Page 7 of 9
Step 4
– Route Trunk Cable(s)
1. Pull shelf out to fully extended position.
2. Pull the trunk cable(s) to the rack and determine the best way to route the cable to the shelf (from above or
below).
3. The trunk cables and sub-units may enter shelf from right or left side of rear apron. Carefully loop cable to
rear of shelf on either side and continue to feed cable over top of rear apron. Loosely secure cable to rear of
shelf using a cable tie or hook-and-loop strap.
4. Temporarily store slack sub-units in shelf.
5. Remove plug from appropriate size opening in shelf to accommodate cable gland on fiber cable. Select an
opening on rear apron that will be most advantageous for cable entry.
6. Loosen locknut on cable gland. The locknut does not have to be removed to install the cable gland.
