TECP-92-159 • Rev D • May 2018
Page 22
© 2018
CommScope
. All Rights Reserved.
3. Route the fibers within the splice trays as shown in
and
. The stranded
fibers fill in 48 to a splice tray, The ribbon pigtails fill in 96 fibers per splice tray.
shows the routing for stranded pigtails within the splice tray.
for ribbon pigtail.
26603-A
BARE
FIBER
LACING
JACKETED
FIBER
Figure 25. Mass Fusion Heat Shrink Splice Tray Cable Routing
26604-A
BARE
FIBER
LACING
JACKETED FIBER
Figure 26. Splice Tray Cable Routing
4. Use A hook-and-loop strap to secure the splice tray to the panel.
Note: In all cases pigtails are wound in a clockwise direction with one full loop of slack
within the splice tray. All pigtails enter the splice tray at the bottom right, as shown.
Note: When mass fusion splice chips are used (ribbon cable), the bottom splice tray can be
used for slack.
