CommScope 1RU Series, Руководство по установке

Страница: 13 / 28

TECP-92-159 • Rev D • May 2018
Page 13
© 2018 CommScope . All Rights Reserved.
3. Pull the Nylatch plunger fastener out, orienting the MPO as shown in Figure 14 .
Caution: Adapter packs and MPO cassettes should not be both used in the same panel.
IN S TALL LEFT S IDE MPO
CA SS ETTE S WITH ADAPTER S
ANGLED TOWARD THE LEFT
IN S TALL RIGHT S IDE MPO
CA SS ETTE S WITH ADAPTER S
ANGLED TOWARD THE RIGHT
IN S TALL MPO CA SS ETTE S
IN ORIENTATION S HOWN
25682-A
AFTER IN S TALLING MPO CA SS ETTE,
PU S H NYLATCH PLUNGER FA S TENER S
"IN" TO LOCK CA SS ETTE INTO PANEL
"IN"
POSITION
NYLATCH PLUNGER FA S TENER S MU S T BE
PULLED OUT BEFORE IN S ERTING THE
MPO CA SS ETTE INTO MOUNTING HOLE S
IN PANEL
"OUT"
POSITION
Figure 14. Installing MPO Cassettes
To remove an MPO cassette, pull the Nylatch plunger fastener out, as shown in Figure 14 , to
release the cassette, then withdraw it from the panel.