background image

 

5 HOMEDEPOT.com

 

 

Please contact 1-844-548-3776 for further assistance.

Preparing for Installation

CAUTION:

 Do not try to rotate the photocell receptacle 

on top of the fixture as it may twist the wiring. 

NOTE:

 Make sure the photocell is locked on the receptor. 

Do not over rotate after it is locked.

Review this information to ensure a successful 
installation:

 

Install the light 5-10 ft. above the ground.

 

Do not mount the fixture close to reflective 
surfaces such as windows, white walls, white 
surfaces and water.

 

When installing two fixtures on one switch, 
make sure the switch is rated for at least a 1A 
inductive load.

 

Do NOT wire to dimming switch.

 

When mounting the fixture, make sure the 
photocell orientation is at the top for wall 
mount.

 

When mounting to a wall, make sure the 
fixture is 7 in. on center away from eave and 
13 in. on center away from inside corner of the 
exterior wall.

NOTE:

 The mounting plate (D) attaches to recessed 

mounted standard junction boxes. Junction box must 
be at least 1-1/2 in. in depth for proper installation for a 
recessed mount application.

1-1/2"

1-1/2"

Round

Octagonal/Square

7 in. 13 in.

13 in.

Installation

Turning off the electricity

 

Verify the wall switch is in the Off position.

 

Turn off power at the circuit breaker that 
supplies power to the outlet box you are 
working on.

 

For screw-in type fuses unscrew the fuse 
that supplies power to the outlet box you are 
working on.

Содержание PHX12-3K-BZ











Отзывы: