B
CC
AA
5
HOMEDEPOT.com
Please contact 1-877-527-0313 for further assistance.
Installation
1
Installing the bracket (wood stud)
If you are installing this mounting system in masonry (concrete), proceed to step 2.
CAUTION:
Avoid drilling near electrical wiring and water
pipes. The mounting system must be attached to a weight
bearing wall and must be installed directly onto the center
of the wood studs. Failure to observe all safety precautions
can result in serious physical injury and/or property
damage. Consult a professional installer or call customer
service if you have any questions.
CAUTION:
Tighten the screws so that the bracket is
damage the screws, greatly reducing the holding power.
CAUTION:
Wood studs must be no smaller than 2 x 4
in. in size.
□
Use a commercially-available stud finder to locate the stud centers in the wall. Studs are usually
spaced 16 in. apart.
□
Use the bracket (B) as a template to mark the installation holes. Use a level to ensure the bracket is level.
□
Use a 5/32 in. (4 mm) wood drill bit to drill 2 in. (50 mm) pilot holes.
□
Attach the bracket (B) to the wall using the lag bolts (AA) and washers (CC).
Содержание MB-51310
Страница 1: ...MB 51310 WALL MOUNT COMPONENT SHELF...
