5 HOMEDEPOT.com
Please contact 1-877-527-0313 for further assistance.
Installation
1
Installation considerations
□
What is the best layout configuration for your installation?
□
How will you run and conceal the wires to your LED tape lighting?
□
Temporarily mounting the LED light strip using painter’s tape allows you to experiment with tape light
positioning before permanent installation.
IMPORTANT:
Using painter’s tape or masking tape,
temporarily place the LED light strip into your desired
mounting position. Power on the LEDs to make sure you
are achieving the desired lighting effect before removing
the 3M paper backing for final installation.
2
Connecting LED tape and adapter
□
Use the following four ways to connect the LED tape and adapter according to installation requirements.
• Connect LED tape to connector
• Connect connector to LED tape
• Connect LED tape to LED tape
• Connect connector to connector
Connect connector to LED tape
Connect LED tape to connector
12V
+
R
G
B
W
+12V
R
G
B
W
NOTE:
Connect LED tape to connector by
aligning at the +12V on the LED tape and the
arrow on the connector.
NOTE:
Connect connector to LED tape by
aligning at the arrow on the connector and the
+12V on the LED tape
Connect connector to connector
Connect LED tape to LED tape
12V
+
R
G
B
W
+12V
R
G
B
W
NOTE:
Connect LED tape to LED tape by
aligning at the +12V on the LED tape.
NOTE:
Connect connector to connector by
aligning at the arrows on the connectors.
