10
Operation
1
Using the remote
□
Direct the remote (D) towards the infrared receiver (C) to change RGBW colors of the strip.
A---
Use to increase or decrease color brightness
and to slow down or accelerate speed.
B---
ON/OFF switch.
C---
R,G,B,W:
Choose color: red, green, blue or warm white.
D---
Flash key: 7 color jump change.
E---
Strobe key: Strobe color effect.
F---
Fade key: 7 color fade change.
G---
Smooth key: 3 color jump change.
(NOTE: there are 10 light intensity options
and 10 speed setting options)
A
B
R
G
B
WW
Flash
Strobe
Fade
Smooth
OFF
ON
E
C
D
F
G
NOTE:
Sensor efficiency distance ≤ 5 meters
2
Changing the battery
□
To replace the battery, unscrew the small screw on the back side of the remote (D), and refer to the
diagram on the back side of the remote.
D
R
G
B
WW
Flash
Strobe
Fade
Smooth
OFF
ON
Open
Push
□
Always purchase the correct size and grade of battery that is most suitable for the intended use.
□
Clean the battery contacts and also those of the device prior to battery installation.
□
Ensure the batteries are installed correctly with regard to polarity (+ and -).
□
Remove batteries from the equipment when it is not being used for an extended period of time.
□
Remove used batteries promptly.
WARNING:
The remote contains a CR2025 DC 3V button battery. If swallowed, it could
cause severe injury or death within 2 hours. Seek medical attention immediately.
