3 HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
Assembly and Operation
1
(Optional) Installing the wheel
assembly
□
Snap the included wheel assembly to the cradle base
on the fan, opposite the handle. Ensure that the wheel
assembly is not installed too close to the middle of the
cradle base to avoid balance issues.
2
Adjusting the fan angle
WARNING:
Do not move or adjust fan while in operation.
□
Loosen the knobs (1) on both sides of the fan by twisting
counterclockwise.
□
Tilt the fan to your desired angle.
□
Re-tighten the knobs (1) when finished by twisting
clockwise.
1
3
Moving the fan
WARNING:
Do not move or adjust fan while in operation.
□
Grasp the fan by the handle (1), raise the fan up slightly,
and roll the fan to your desired location.
1
4
Turning the fan on and off
□
Plug the power cord (2) into an outlet.
□
Press the power switch (1) located on the rear grille to
toggle between hi, off, and low settings.
1
2
