background image

 2
 

Table of Contents

Safety Information  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Warranty  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Pre-Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Preparing for Installation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Installation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Care and Cleaning   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Troubleshooting  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Safety Information

IMPORTANT

THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE 
APPLICABLE NATIONAL ELECTRICAL CODE AND LOCAL BUILDING 
CODES BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND 
OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.

PRECAUTIONS

 

Please read and understand this entire manual before 
attempting to assemble, install, or operate this light fixture.

 

This light fixture requires a 120–277 Volt AC power source.

 

Some codes require installation by a qualified electrician.

 

This light fixture must be properly grounded.

 

Make sure connections are secure using wire nuts, crimp-on 
lugs or other UL approved connecting devices.

 

This light fixture should be installed outdoors to a wall or to a 
pole.

 

This product may contain chemicals known to be hazardous. 
Thoroughly wash hands after installing, handling, cleaning or 
otherwise touching the product.

NOTICE:

 For dimming, connect to 0–10V dimming switch.

NOTICE:

 FCC Regulations state that any unauthorized changes 

or modifications to this equipment not expressly approved by the 
manufacturer could void the user’s authorization to operate this 
equipment.

WARNING:

 Before installation or servicing of the fixture, 

turn the power OFF at the circuit breaker or fuse. Place tape 
over the circuit breaker switch and verify power is OFF at 
the light fixture.

WARNING:

 Risk of fire. Keep the lamp heads at least 3 in. 

(76 mm) from combustible materials.

CAUTION:

 Burn hazard. Allow the light fixture to cool 

before touching.

IMPORTANT:

 The device is tested and found to comply 

with Part 15 of the FCC Rules. Operation is subject to 
two conditions: (1) This device may not cause harmful 
interference and, (2) this device must accept any 
interference received, including any interference that may 
cause undesired operation.
This equipment has been tested and found to comply with 
the limits for a Class A digital device, pursuant to Part 
15 of the FCC rules. These limits are designed to provide 
reasonable protection against harmful interference when 
the equipment is operated in a commercial environment. 
The equipment generates, uses, and can radiate radio 
frequency energy and, if not installed and used in 
accordance with the instruction manual, may cause harmful 
interference to radio communications. Operation of the 
equipment in a residential area is likely to cause harmful 
interference in which case the user will be required to 
correct the interference at his own expense.

Warranty

This is a limited warranty offered by the manufacturer for a period of five years from the date of purchase to its customers. The 
manufacturer warrants to customers that the products will be free from defects in material and workmanship. The obligation of the 
manufacturer under this warranty is limited to the provision of replacement of products and is extended to the original purchaser of the 
product on presenting valid purchase receipt or other proof of date of original purchase acceptable to the manufacturer. The receipt is 
required for rendering the warranty performance. Any warranty claims without original proof of purchase would not be accepted. 
It should be noted that the warranty does not apply to the manufacturer products that have been altered or repaired by unauthorized 
personnel, have been subjected to neglect, abuse, misuse or accident or damages caused during shipping. Any other products not 
manufactured by the manufacturer which have been supplied, installed and/or used in conjunction with the manufacturer products are not 
covered under this warranty. Any damages caused by replacements bulbs, LEDs or corrosion or discoloration of brass components are also 
not covered by this warranty. 

Содержание 1003 943 420

















Отзывы: