Page 8
ENGLISH
FUNCTIONS
SPRAYING (ALL MODELS)
This function can be used with stream or dry ironing and does not affect the ironing
temperature.
1. Check the water level. Add water if needed.
2. Aim the nozzle towards the garment.
3. Press the Spray Button,
. Repeat if spray does not
work immediately.
STEAM IRONING (ALL MODELS)
This function can be used only at higher ironing temperatures.
••
For moderate steam
••• or MAX
For maximum steam
1. Check the water level. Add water if needed.
2. Stand the iron upright and be sure the temperature dial is set to MIN.
3. Plug the power cord into electrical outlet.
4. Turn the Temperature Control to the “••,” “•••” or MAX setting. Consider the
fabric type to be ironed.
5. The temperature operating indicator light turns off when the required
temperature is reached. The iron is ready for use. The light will go ON and OFF
while ironing.
6. Turn the Steam Knob to the required position, steam starts coming out from the
holes in the sole plate.
NOTE:
With conventional steam ironing, water may leak from the sole plate if too low a
temperature as been selected. If this happens, turn the Temperature Control to the
advised position. Steam will recommence as soon as the appropriate temperature has
been reached.
DRY IRONING (ALL MODELS)
1. Ensure that the Steam Control Knob is in position “0.”
2. Select the setting on the Temperature Control. Consider the fabric type to be
ironed.
3. When the temperature operating indicator light turns off, the required
temperature is reached. The iron is ready for use.
SET UP & USE
max
