Page 11
ENGLISH
CLEANING AND CARE
SELF-CLEAN FUNCTION
You can use the self-clean function to remove scale and impurities. Use the self-clean
function once every two weeks. If the water in your area is very hard the self-clean
function should be used more frequently.
ATTENTION: FOR MODELS CCSI100 AND CCSI200 ONLY
1. Make sure the steam iron is unplugged and the temperature is in the MIN position.
2. Check the water level which should be filled to the maximum.
3. Plug the unit into the electrical outlet and set the iron on its heel on a flat stable
surface.
4. Set the steam control to the self-clean setting and select maximum on the
temperature control dial.
5. When the temperature operating indicator light has gone out, unplug the unit.
6. Hold the iron horizontally over a sink, press and hold the steam control and gently
shake the unit forward and back.
NOTE:
· Steam and hot water will come out of the vents of the soleplate. Flakes of impurities
if present will be flushed out.
7. Release the setam control when all of the water in the tank has been used.
Repeat the self-clean process if the iron still contains a lot of impurities.
ATTENTION: FOR MODELS CCSI300 AND CCSI400 ONLY
1. Make sure the appliance is unplugged.
2. Set the steam control knob to position “O”
3. Fill the water tank to maximum level.
4. Select the maximum ironing temperature.
5. Put the plug in the wall socket.
6. Unplug the iron when the amber temperature operating indicator light has gone
out.
7. Hold the iron over the sink, press and hold the self-clean button and gently
shake the iron and fro. (Steam and boiling water will come out of the soleplate.
Impurities and flakes (if any) will be flushed out.)
Release the self-clean button as soon as all water in the tank has been used up.
