background image

6

3) Monitoring

   ①

Press the “Monitoring button” in standby mode, you can check the image in order.

- Camera 1 → Camera 2 → OFF → Camera 1 → repeat

    

Press “Call” button during monitoring to call to the entrance.

4-1-2 Use for MODUM system

- This function is only for MODUM system.
- If the MODUM system is connected, it is automatically recognized when it boot. 

Please reboot the power after installation for stable operation.

- Enter the OSD menu, OSD will be arranged in order as same as front touch key buttons

1) Communicate with visitor

    (1) Communicate in monitor
    (a) Paging from a common entrance

   

When a visitor page from a common entrance, the paging tone rings and the visitor’s
figure appears on the monitor.

   

Press “Call” button to talk to the visitor and “Door release” button to open the door.

(The door release function is enabled only when the screen is turned on.)

   

If another visitors calls from an individual entrance, the paging tone rings and press
“Monitoring” button to receive a call from the individual entrance after finishing the
communication with a common entrance.

   

Press “Call” button to finish the call and convert to standby mode.

    (b) Paging from an individual entrance
     - Same as the Single system mode.(Except interphone related information)

Содержание CMV-43S




















Отзывы: