5
4. Operation
4-1 Functions for single & MODUM system
4-1-1 Use for single system
1) Communicate with visitor
(1) Communicate in Monitor
①
As the paging button on a door camera is pressed, the paging tone rings at the
connected videophone and the visitor’s figure appears on the monitor.
②
Press “Call” button to talk to the visitor and “Door release” button to open the door.
(The door release function is enabled only when the screen is turned on and the
individual door camera has door release terminal)
③
If another visitor calls from another entrance during a call, the first call is
automatically ended and the connection to another entrance is made.
④
Press the “Call” button to finish the communication and convert to the standby
mode.
(2) Communicate with additional interphone
①
As the paging button on a door camera is pressed, the paging tone rings at the
interphone and videophone at the same time.
②
Pick up the hand-set to start talking with a visitor, and to release the door for
pressing HOOK switch or Door release button.
(The door release function is enabled only when the screen is turned on and the
individual door camera has door release terminal).
③
Visitor, interphone and monitor can communicate at the same time if press the “Call”
button of monitor.
④
Hang off the hand-set to finish the call and convert to standby mode.
2) Communication between the monitor and interphone
(1) Monitor
➔
Interphone
①
Press the “Guard and interphone” button in the monitor, the paging tone rings at the
interphone.
②
Pick up the handset to start communicating with interphone.
③
Press “Call” button to finish the communication and convert to standby mode.
(2) Interphone
➔
Monitor
①
Pick up the hand-set and press the “Call” button, the paging tone rings at the
monitor.
②
Press “Call” button on the monitor to start communicating.
③
Hang off the hand-set to finish the communication and convert to standby mode.
