‐ 6 ‐
·
Operate the unit on free volt AC(100~240V), 50/60Hz
·
Should any solid object or liquid fall into the cabinet, unplug
the unit and have it checked by qualified personnel before
operating it any further.
·
One blade of the plug (for 120V Version, only) is wider than
the other for the purpose of safety and will fit into the power
outlet only one way. If you are unable to insert the plug fully
into the outlet, contact your dealer.
·
Allow adequate air circulation to prevent internal heat build-up.
Do not place the unit on surfaces (rugs, blankets, etc) or near
materials (curtains, drapreris) that may block the ventilation
slots.
·
Do not install the unit near heat sources such as radiators or air
ducts or in a place subejct to direct sunlight, excessive dust,
mechanical vibration or shock.
·
Keep the unit and glass away from equipment with strong
magnets, such as a microwave oven or large loudspeakers.
·
Do not place any heavy object on the unit.
·
When the unit is not in use, turn off the power to conserve
energy and to extend its useful life.
·
Clean the cabinet away, panel and controls with a dry soft
cloth, or a soft cloth lightly moistened with a mild detergent
solution.
·
Do not use any type of solvent, such as alcohol or benzine,
which might damage the finish.
Do not throw away the carton and packing materials. They make
an ideal container in which to transport the unit. When shipping
the unit to another location, repack it as illustrated on the carton.
On Safety
On Installation
On Operation
On Cleaning
On Repacking
Preparation
