FEB.20, 2003
RST872
6
6. Green
W ire:
Zone 3
/ Negative Door Pin Trigger Input:
4. Blue
Wire:
Zone 2
/ Instant Trigger Ground
7. Violet
Wire:
Zone 3
/ Positive Door Pin Trigger
2. White / Violet
W ire: (
+
) Positive Safety Shut Down Input for Brake switch.
3. Black/White
W ire: (
-
) Neutral Safety Switch Input &
(
-
) Remote Start Toggle Switch Input
9. White / Red
Wire: Tachometer Signal Input
+12V
1. White / Black
W ire: (
-
) Negative Safety Shut Down Input for Hood pin switch
IMPORTANT NOTE:
Directly connect the H5/3 BLACK/WHITE wire to the “GROUND” when this wire
is not used.
+12V
5. White / Green
Wire: (
-
) Diesel Wait-To-Start Input
8. White / Blue
Wire: (
-
) Instant Start and Turn Off Input
#H8. 10 PIN WHITE CONNECTOR FOR OUTPUT CONNECTION
4. White
Wire: (
-
) 200mA Dome Light Control Output
7. Gray
Wire: (
-
) 200mA Channel 3 (Trunk) Output
10. Orange
Wire: (
-
) 500mA Grounded Output When Armed
1. Yellow
Wire: (
-
) 200mA Ignition 3 Control Output
8. Pink
Wire: (
-
) 200mA Programmable Output
1. 2 Steps Door Unlock Output (Factory Default Setting) or
2. Factory Security Disarm Signal Output or
3.
Start Status (Shock Sensor By-Pass Control) Output
3. Brown / White
Wire: (
-
) 200mA Programmable Output
1. Horn Output (Factory Default Setting) or
2. Factory Security Rearm Signal Output
6. Black / Green
Wire: (
-
) 200mA Programmable Output
1. Channel 4 Programmable Output (Factory Default Setting) or
2.
. Key Sensor By-Pass Output
2. Black / Violet
W ire: (
-
)200mA Channel 6 Programmable Output
5. Black / Red
Wire: (
-
) 200mA Channel 5 Programmable Output
9. Orange / White
W ire: (
-
)200mA Grounded Output When Disarmed
WIRING
