FEB.20, 2003
RST872
15
PROGRAMMING
A. PROGRAMMING TRANSMITTER:
PROGRAMMING THE REMOTE TRANSMITTER
Note:
This mode will only retain the last 4 remote transmitters programmed. If the transmitter memory is
exceeded, the security system will start deleting transmitters from memory in chronological order.
Enter:
1. Turn the Ignition 'switch ‘OFF/ON’ 3 TIMES and stay in ON position. Within 15 seconds.
2. Push the Valet switch 3 times and hold it until a long chirp is hearing then release the valet switch. You
are now in the Transmitter programming mode.
Program:
1. Press button on one of the transmitter until the siren responds with a confirming chirp the first transmitter
is now programmed.
2. Press button on the second transmitter until the siren responds with a confirming chirp, the second
transmitter is now programmed.
3. Apply the same procedure to program 3rd and 4th
.
Exit:
Turn Ignition to 'OFF' position, or leave it for 15 seconds. A 3 long chirps & 3 parking light flashes to
confirm exit.
B. FEATURES PROGRAMMING:
ALARM FEATURE “
I
” PRORAMMING:
1. Turn the Ignition 'switch ‘ON/OFF’ 3 TIMES and stay in OFF position.
2. Push the Valet switch
2
times and hold it until
one
chirp with a long chirp is hearing then release the valet
switch. You are now in the Alarm feature
‘I’
programming mode.
3. Press and release the transmitter button ‘A’ corresponding to the feature ‘A’ you want to program.
a.
The siren chirps and LED pause will indicate previously setting.
b.
The factory default settings is always [1] LED flash, [1] chirp.
4 Depress the transmitter button ‘A’ again to change the feature. Simple keep re-depressing the transmitter
button ‘A’ again until the module advances to your desired setting.
a.
In this case, Press button ‘A’ again, the module would advance to [2] LED flash, [2] chirps.
b.
Press button ‘A’ again, the module would advance to [3] LED flash, [3] chirps etc.
5. Depress the transmitter button ‘B’ corresponding to the feature ‘B’ you wants to program.
For example:
To program the arming mode form “Active arming” to “Passive Arming without Passive Door
Locking”, After “Arming mode” program, the next program is “Rearm on/off” .……….
1 Turn the Ignition 'switch ‘ON/OFF’ 3 TIMES and stay in OFF position.
2 Push the Valet switch 2 times and hold it until a chirp with a long chirp is hearing then release the valet
switch.
3 Press and release the transmitter
button corresponding to the feature ‘Arming mode’ you wants to
program. [1] LED flash, [1] chirp to indicate your are in features “Active Arming”.
4 Depress the transmitter
button twice to change the feature. [3] LED flash, [3] chirps to indicate your
are in features “Passive Arming without Passive Door Locking ”.
5 Depress the transmitter
button corresponding to the features ”Rearm on/off”’ you want to
program……..
Press
Transmitter
Button
One Chirp /
LED one pulse
Factory Default
Setting
Two Chirps /
LED two pulses
Three Chirps /
LED three pulses
Four Chirps /
LED four pulses
1
All chirps on
Siren chirp on only
Horn chirp on only
All chirps off
2
Active arming
Passive arming
without passive door
locking
Passive arming
with passive door
locking.
3
Automatic Rearm
on
Automatic Rearm off
4
3 seconds delay
Door Ajar error
chirp
30 seconds delay
Door Ajar error chirp.
