Command Light KL408A Скачать руководство пользователя страница 6

KNIGHT

2

6

Warranty/Service 

COMMAND LIGHT

 products* come with a industry leading 5 year warranty against any defects in 

materials and workmanship when used and operated for a period of five years. If during this time period, 

you have any malfunctions not related to misuse, accident, neglect, or normal wear and tear, please take 

the following steps in order to have your light tower serviced under 

COMMAND LIGHT’s

 warranty.

1.  Contact us immediately for initial diagnosis and parts if needed at 800-797-7974  

or [email protected] 

2.  You will need to have immediate access to light tower. This process can be done by individuals with 

little mechanical ability. (Involves pushing buttons and telling us what the light tower is doing or not 

doing) 

3.  We then send parts (if needed) and have a technician dispatched (if needed) with a written work 

authorization number and a base amount of hours allotted to do repair 

4.  We remain available for service support via phone, email, or video conference while technician 

completes repair, also to extend original time allotted if additional issue arise 

5.  Mark repair as completed and validate the work authorization number for hours of labor /travel rates 

as agreed during diagnosis 

6.  Finally, we will pay out or credit the invoice when we receive it from person/company performing  

the repair

Please make contact with us as soon as problems arise in order to execute our warranty. We must have 

knowledge of the issue and a work order in place in order to pay or reimburse the department with the 

issue. Any unauthorized service voids this warranty. (No work is authorized until the call is made to us)

Contact Us Early – before any work is done – We’d love to help!

 

Содержание KL408A









































Отзывы: