eCOMM Terminal User Guide - 5
Guide to Essential Operations
Turn the Terminal On/Off
To turn on:
press the key (located on the left side of the terminal) for 2 - 3 seconds.
After a boot-up sequence you will see the time displayed on the Lock screen. Swipe
up once to see the Android Home screen. From here tap the ‘Pay’ section at the top to
launch the eCOMM Payment Terminal Application. You will then see the Home page of
the eCOMM application, with buttons for ‘Pay’, ‘Refund’, etc.
If you want to go back to the Android Home screen, simply press the white circle
at the very bottom of the screen. To switch back to the eCOMM Payment Terminal
Application, press the white square at the very bottom of the screen and select the
eCOMM application. Tap the application to ensure it goes fullscreen.
To turn off the terminal:
make a long press on the key at the side of the terminal,
then press the onscreen symbol, and then press OK to confirm.
To lock the screen and put the terminal into sleep mode, press the key briefly. To
bring the screen back again, simply press the key briefly again.
Using Cards
Contactless Card:
hold the contactless card
over the sensing area, which is an area of
black plastic marked with the symbol
(do not hold the card over the screen for best
reception). Hold in place for around 1 second
until you hear a “beep” sound which means a
successfully completed transaction.
Chip & PIN:
insert the card chip side upward
into the card slot, which is found on the right
side of the unit, push in fully until stopped.
The card should remain in the slot for the
duration of the transaction process.
power port
