Modular Matrix Switcher
Comm-tec Srl
62
www.comm-tec.it
7.2. TCP/IP Communication Software
(Exampled by TCPUDP software)
1)
Connect a computer and MTX88M-N to the same network. Open the TCPUDP software
(or any other TCP/IP communication software) and create a connection, enter the IP
address and port of MTX88M-N (default IP: 192.168.0.178, port:4001):
2)
After connect successfully, we can enter commands to control the MTX88M-N, as
below:
Here you will receive the
feedback when a command
is sent.
Enter your command here.
Commands are the same with RS232
commands listed in
6.3 RS232
Communication Command
