Modular Matrix Switcher
Comm-tec Srl
28
www.comm-tec.it
4. Button Control
The matrix can be rapidly controlled with its front panel buttons. Here is a brief operation
guide.
Format: “
Input Channel
” + “
Switch Mode
” +“
Output Channel
”
Note:
●
“Switch Mode”:
✓
AV: Switch AV signal from AV signal card and audio signal from audio card
synchronously.
✓
Video: Switch AV signal from AV signal card.
✓
Audio: Switch audio signal from audio card.
●
“Input Channel”: Fill with the number of input channel to be controlled.
●
“Output Channel”: Fill with the number of output channels to be controlled. Press “All” to
select all the outputs.
●
The input/output channels on the rear panel are counting from left to right, top to
bottom.
●
The input delay time between two numbers of every input and output channel must be
less than 5 seconds; otherwise the operation will be cancelled.
Example:
●
To switch input 1 to output 1, press input “1”, output “1”.
●
To switch signals
from input 1 to all output channels, press buttons in this order: “1”,
“All”.
Functional Buttons:
●
UNDO
: Return to the previous status
Example: Input 6 is connecting with output 6, press input “6” + “AV”+ output 4 to change
the connection.
Press “Undo” to enable input 6 to reconnect with output 6.
●
:
If press buttons “1”, “AV”, “2”, “
” in order, then “2” will be canceled
.
●
THROUGH:
Get straight I/O connection, e.g. input 1-> output 1, input 2-> output 2.
Press “Input Channel” + ”Through”
Example: If you press buttons “ALL”, “THROUGH” in order, then the result will be like input
1
→ output 1, input 2→output 2, input 3→output 3 … input 8→output 8.
