Comfy Go Mobility
Email: [email protected],
Tel:+1 844 755 5055
10
4. Sit on the chair and Lean backwards to make sure the clip locker which located below the seat to the
rear of the Fold Power Wheelchair PATRIOT 12, to lock the seat into place. This step is very important!!!
5. Install the controller into the open slot on the arm of the chair, on the right side (if user needed, can
change to left side). tighten knob located under the armrest to secure the controller in place.
6. Connect the controller wire harness to the CPU wire harness. Take care the line up the pins properly
as arrow tip indicate, so that they do not get bent, broken or damaged.
Grasp push bar
Hold down seat to expand
Slide joystick
Controller into
armrest
Secure joystick controller knob
Note: Make sure connector pins
“white arrow” to “white arrow”.
